F210 Series｜SPRAY GUN｜MEIJI AIR COMPRESSOR MFG.CO.,LTD

F210 Series

Hand Spray Guns：General Purpose Type

	New atomizing system Improving the spray finishing by optimum air flow

●Realizing high quality paint film by optimum spraying paint volume.
●Stable air flow vastly realizes the prevention of air pressure lost.
●Reduction of paint consumption, and small air consumption in saving energy.
●Optimum air flow brings the reduction of paint adhesion to air cap set.
●Easy handling with optimum weight balance and light weight.
●Reduction of trigger load, and improvement of usability with lower resistance packing.
●Waterborne compatibility.
●Improvement of parts durability.
●Addition of Semi-tulip pattern.
●Each nozzle bore size has its own air cap set.
●Air cap sets for suction, gravity, and pressure type are interchangeable in the same fluid nozzle bore size

▽Air cap selection guide for F210 series
Air cap		12P	15P	20P	25P	30P	15	20	25	30	15T	20T	25T
Nozzle bore mm	1.2	-	●	●	●	●	●	●	●	●	●	●	●
	1.5	●	-	●	●	●	-	●	●	●	-	●	●
	2.0	●	●	-	●	●	×	-	●	●	●	-	●
	2.5	×	×	●	-	●	×	●	-	●	×	●	-
	3.0	×	×	×	●	-	×	×	●	-	×	●	●
Suction type in the same nozzle size are interchangeable for pressure type and vice versa. Spraying paint volume and air consumption are adjusted by changing air cap set and fluid nozzle. Mark 〇 stands for interchangeable.

▼F210 Series
Model No.		F210-P12P	F210-P15P	F210-P20P	F210-P25P	F210B-P30P
Paint feed system		Pressure
Nozzle Bore	mm (in)	1.2 (0.047)	1.5 (0.059)	2.0 (0.079)	2.5 (0.098)	3.0 (0.118)
Standard air cap		12P	15P	20P	25P	30P
Spraying Pressure	MPa (PSI)	0.25 (36)
Spraying sidtance	mm (in)	250 (9.843)
Air con-sumption	L/min (cfm)	335 (11.8)	345 (12.2)	375 (13.2)	410 (14.5)	420 (14.8)
Paint spraying volume	mL/min	530	880	1280	1710	1940
Maximum effective pattern width	mm (in)	350 (13.780)	370 (14.567)	400 (15.748)	420 (16.535)	440 (17.323)
Pattern Shape		Tulip
Required compressor output	kW	2.2 or more			3.7 or more
Weight	g (lbs) [oz]	391 (0.86) [13.8]
Standard paint cup		Paint pressure feed tanks, diaphragm paint pumps
Measurement	m³	0.06/25PC

Model No.		F210-S15 <F210-S15T>	F210-S20 <F210-S20T>	F210-S25 <F210-S25T>	F210B-S30
Paint feed system		Suction
Nozzle Bore	mm (in)	1.5 (0.059)	2.0 (0.079)	2.5 (0.098)	3.0 (0.118)
Standard air cap		15 <15T>	20 <20T>	25 <25T>	30
Spraying Pressure	MPa (PSI)	0.25 (36)
Spraying sidtance	mm (in)	250 (9.843)
Air con-sumption	L/min (cfm)	170<250> (6.0<8.8>)	220<280> (7.8<9.9>)	275<335> (9.7<11.8>)	320 (11.3)
Paint spraying volume	mL/min	205<220>	285<265>	350<325>	360
Maximum effective pattern width	mm (in)	220<300> (8.661<11.811>)	280<310> (11.024<12.205>)	300<320> (11.811<12.598>)	300 (11.811)
Pattern Shape		Triangle <Tulip>
Required compressor output	kW	1.5<2.2> or more	2.2<2.2> or more	2.2<3.7> or more	3.7 or more
Weight	g (lbs) [oz]	391 (0.86) [13.8]
Standard paint cup		10SC , 10SLB
Measurement	m³	0.06/25PC

Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup.
Feed pressure should be 0.08MPa(12PSI) for P types.
The paint spraying volume and maximum effective pattern width indicated for T types should be determined
using urethane-based automotive repair paint with a viscosity of12 seconds and a Meiji model V-1 viscosity cup.

by phone

FAX.+81-6-6309-0157

by e-mail