Contact UsZolacoat gun (F210Z-PZ)
PRODUCT
-
F210Z-PZ
Features
Wide selection of models
In addition to models specially designed for use with tile, resin, mortar, stucco, micro-fine stucco, etc.,
our extensive product line-up also includes multi-purpose spray guns and other models for every type of application.
Lightweight, excellent balance
Optimum efficiency design makes these spray guns extremely light-weight and
the excellent handling balance minimizes operator fatigue during extended use.
One-touch operation (Models AGA, HS2A and HS2YA)
A special patented mechanism in which a hollow needle valve is automatically moved
back and forth by air pressure makes "one-touch" operation possible for improved
work efficiency.
Thoughtfully designed to make work easier
(Models SGS, AGA, KGA and LGA)
The large cup capacity and good paint flow make working with these spray gun easier.
An air regulating valve eliminates uneven spraying to ensure consistently reliable
painting , and a valve button locking system enables continuous operation.
How to Select a Spray Gun for Architectural Painting
Determine the spray gun and paint nozzle bore to be used according to the name of the
paint, the paint viscosity, the size of the aggregate, and the pattern.
Also refer to the standard specifications listed in the paint catalog with regard to the
spray gun name, nozzle bore, spraying pressure, etc.
Types of Aggregate
Quartz sand, white marble, sand, clay-based crushed grains
50 mesh = 279μm
Reference sizes : Table salt = 100μm,
Strand of human hair = 70μm
| Model No. | F210Z-P25Z | HS2-G / HS2Y-G | F210Z-P |
|---|---|---|---|
| Zloacoat | ● | ||
| micro-fine stucco | ● | ||
| Adhesive | ● | ||
| Size of aggregates | - | 50 mesh and smaller | - |
| ●Adhesive must be a solvent-based type with a viscosity of 500 MPa・s or less ●Mark * is for water-based Zolacoat. |
|||
Specifications
| Model No. | F210Z-P25Z | |
|---|---|---|
| Type | Zolacoat gun | |
| Paint feed system | Pressure | |
| Nozzle bore |
mm (in) |
2.5 (0.098) |
| Air nozzle bore | mm | - |
| Spraying pressure |
MPa (PSI) |
0.25 (36) |
| Air con-sumption |
L/min (cfm) |
285 (10.1) |
| Spray pattern | Flat | |
| Required compressor output | kW | 1.5 or more |
| Paint cup Capacity |
L (cc) |
1.0 10ZP (1000 10ZP) |
| Weight |
g (lbs) [oz] |
426 (0.939) [15.0] |
| Measurement | m3 | 0.07/15PC |
|
||
3-14, 2-chome, Tagawa, Yodogawa-ku, Osaka, Japan